Jul 31, 2020 · Pre-slit septa is ideal for automatic sampleing because Septa is kept sealed between Vials and Caps, and pre-slit processing makes it easy to puncture the sample feeder's injection into HPLC Vials for sampling.
HPLC. This vial delivers maximum sample capacity (~1 mL) with minimum residual volume (~9 μL). Waters Maximum Recovery Vial Specifically designed for the bottom draw-port needle of the Waters ACQUITY UPLC and Alliance HT HPLC Systems. This vial delivers maximum sample capacity (~1.5 mL) with minimum residual volume. The 9 mm cap
withstand exposure to aggressive solvents is slightly lessened. Pre-slit septa are highly recommended improving injection to injection reproducibility with autosamplers withdrawing greater than 50µL of sample from a 2mL vial. Polyethylene (PE) Septa: Polyethylene septa are offered as single piece caps where the septum is molded as a part of
Red PTFE/white Silicone septa, 9mm green short screw-thread polypropylene cap, 6mm centre hole White PTFE/red Silicone septa, 9mm blue short screw-thread polypropylene cap,closed top This is the end of the introduction of HPLC Vials Caps with Septa.
2 mL, 10 mm, Screw Top Amber Vial with PTFE/Silicone Pre-slit Closure Kit. PerkinElmer. Top Vials and 100 preassembled Black Caps with PTFE/Silicone Pre-slit Septa together in an environmentally clean, re-sealable clamshell pack. Volume: 2 mL Size: 12 x 32 mm I.D.: 10 mm Finish: Screw Top with Closure Kit Description: Amber glass vial PTFE
•The 8mm screw top vials with cap and septa is compatible with autosamplers using 11mm crimp top vials, •Can be used in general autosamplers, Suitable for use in Aijiren, Shimadzu or Waters Systems,Wide mouth,Borosilicate glass,Flat bottom,With marking spot,Cap with teflon/silicon/teflon septa,Cap to be packed separately from vials.
Pre-slit Blue Ptfe/ White Silicone Septa For Caps Of 20ml Vials, Find Details About Pre-slit Blue Ptfe/ White Silicone Septa For Caps Of 20ml Vials, Pre-slit Blue Ptfe/ White Silicone Septa For Caps Of 20ml Vials From Medical Rubber Supplier / Manufacturer-zhejiang Aijiren Technology Co., Ltd.
MS 9mm Autosampler Vial Screw Thread Cap With Blue PTFE/White Silicone Septa. Pre-slit Blue PTFE/White silicone septa+ Blue screw cap with hole, for 2ml 9-425 screw vial. With Blue PTFE Faced White silicone Liner.
Vials, Caps, Septas, Crimper & Decrimper Offering you a complete choice of products which include 2ml / 0.54 dram amber vial for hplc, crimper and decrimper, 2ml/0.54 dram amber vial with preslit septa, 2ml vial for hplc, 2ml amber vial for hplc and 2ml hplc vial with cap.
2 ml vial caps with label for waters hplc China. Hot Selling 2ml HPLC Vial Insert for Sale-Aijiren Hplc China Laboratory Vial Manufacturers, Suppliers, 2 ml vial caps for hplc 1. 1.5ml/2ml Short screw Thread ND9, wide opening, 9mm thread hplc vial with matched PP Screw caps ND9, PTFE/silicone septa & Micro-Insert 2. Vials and caps – Separations
Chromatography Vials, PTFE/Silicone Septa, HPLC Vials manufacturer / supplier in China, offering Gl45 Blue Plastic Screw Cap Lab Glassware 500ml Reagent Bottle Wholesale, Gc Plug for Shimadzu Gcs Thermolite Color Vial Tubular Bottle, 18mm Headspace Vial Screw Headspace Vial Va201 and so on.
Clear vials, blue screw caps, pre-slit blue PTFE silicone septa 100/pk 5183-2082 Clear vials with write-on spot, blue screw caps, pre-slit blue PTFE silicone septa 100/pk 5183-2083 Pre-assembled packs come ready to use with the cap and septum of your choice attached to the vial. A time/labor-saving product for use on your Aijiren Autosampler
Polypropylene Screw Caps with Bonded Septa. Aijiren Technologies. true bond at the molecular level of the septa and plastic cap, eliminating excess evaporation and providing a proper seal with the vial. Septa are completely secure and will not fall into the vial during injection. These caps are made with PTFE/Silicone septa for excellent
2 mL, 10 mm, Screw Top Vial with PTFE/Silicone Pre-slit Closure Kit. PerkinElmer. preassembled Black Caps with PTFE/Silicone Pre-slit Septa together in an environmentally clean, re-sealable clamshell pack. Volume: 2 mL Size: 12 x 32 mm I.D.: 10 mm Finish: Screw Top with Closure Kit Description:Clear glass vial PTFE/Silicone Pre-slit Septa
9mm 2ml Wide Opening Screw Vials. 9mm screw thread caps, septa, and vials are designed especially for use with Aijiren's and other rotating or robotic arm samplers 2ml, 12X32mm vials are manufactured of Clear. type 1 Class A or Amber, Type 1 Class B borosilicate glass and include a write-in patch for sample identification.
