PTFE HPLC Septa Material

Materials commonly used for septa include PTFE, silicone, natural red rubber, butyl rubber, Viton, polypropylene and polyethylene. PTFE is often laminated onto the sample facing side of a resealable septum to improve solvent exposure characteristics. Laminated septa will generally exhibit greater chemical resistance until the PTFE layer is

discounting wholesales PTFE and silicone vial septa factory . Discounting clear HPLC sample vials with pp cap-Aijiren . EPA VOA Vials Voc Vials - Autosampler Vial, Hplc Vial, PTFE 40mL 27.5x95mm Clear Glass EPA/TOC Vial 24-400 White Open Top PP Screw Cap with 22mm Natural PTFE/White Silicone 3.0mm thick Septa (EPA Quality) and Dust Cover. 72pcs/pk. C0000341. 40mL 27.5x95mm Amber Glass EPA /TOC

Pre-slit septa are highly recommended for improving injection to injection reproducibility with autosamplers withdrawing greater than 50µL of sample from a 2mL vial, due to possible cavitation (vacuum). Pre-slit PTFE / Silicone Septum. In order to pierce easily. Diameter: 8mm to 22mm. Thickness: 1mm, 1.5mm, 3mm.

A specially moulded seal with a PTFE insert. Sealing surface of Butyl and PTFE affects a more positive seal than non-PTFE-faced septa. Ideal choice for temperatures below 125°C. Good sealing characteristics, excellent resistance to most solvents with reduced coring and high puncture tolerance.

A specially moulded seal with a PTFE insert. Sealing surface of Butyl and PTFE affects a more positive seal than non-PTFE-faced septa. Ideal choice for temperatures below 125°C. Good sealing characteristics, excellent resistance to most solvents with reduced coring and high puncture tolerance.

the solvent. PTFE/Silicone septa are ideal for use in most HPLC and GC applications where resealability and purity are critical. Pre-slit PTFE/silicone septa Pre-slit septa are offered in many of the same formulations as for non-slit PTFE/silicone septa and shares most of the physical and chemical characteristics.

PTFE/ Synthetic Red Rubber septa are an economical choice for general GC and HPLC applications. Used primarily for routine analysis in gas chromatography with FID, TCD and FPD detectors or HPLC with UV/Vis or RI detectors, PTFE/Synthetic Red Rubber septa offer good resealability and excellent chemical inertness before puncture.

The 2ml clear snap-top HPLC vials made by Aijiren have openings in three sizes: 8mm, 9mm, and 10mm. The 2ml clear snap-top HPLC vials are usually grouped according to the diameter of the vial, the height of the vial, and the finish of the screw. 2ml clear snap top hplc vials for sale. Tel: 008618057059123.

Content. Aijiren produces matching Closures for HPLC Vials, especially Septa, which is made of Silicone and PTFE. Septa can ensure that the hplc vials are sealed. At the same time, it must ensure that the automatic injection needle can penetrate into the interior of Vias for sampling, so for Septa There are certain requirements for the thickness.

1.5mL screw vial kit, including vial, cap and septa, 100/pack. Kit part number. Vial. Vial part number. Septa material. Cap/Septa part number. 220-97331-30.

PTFE/Silicone Septa: (T/S) High quality, pure silicone is laminated to 0.005” thick PTFE to give a pure, highly inert septum with excellent resealing characteristics even after repeated punctures. PTFE/Silicone septa are the preferred product for use in most HPLC and GC applications where resealability and high purity are critical.

-40 °C -40 °C -60 °C natural rubber/TEF natural rubber/TEF; butyl/PTFE red rubber/ PTFE silicone/ PTFE Thin, fragile needle? Soft and thin septa required e.g. silicone/ PTFE Blunt, thick needle? Slit/pre- cut liner as penetration aid (HPLC) silicone/ PTFE, slit Critical analysis? Very clean liner required

Mar 31, 2022 · PTFE disk septa. A solid disk 0.010″ thick, our PTFE stands better than the most aggressive solvents. At least when it comes to chemical inertness. Most standard gauge metal HPLC needles can penetrate the thin membrane. Do not use PTFE septa with the following because you can’t release PTFE septa: 1. volatile solvents, 2. fast cycle periods,

Rubber septa. Used primarily for routine analysis in gas chromatography. Offers moderate ability to reseal and good chemical inertness. Not recommended for multiple injections or holding samples for further analysis. PTFE is protective layer that once broken exposes rubber to chemical attack. Types of rubber septa.