97048-230 Clear Vial w/ Marking Patch w/ 11-0000-100 Insert 100 97048-232* Clear Vial w/ Marking Patch w/ 11-0000-101 Insert 100 97048-234* Clear Vial w/ Marking Patch w/ 11-0000-300 Insert 100
Pre-slit PTFE/Silicone Septa: A PTFE/Silicone septum is provided with a thin 0.005” PTFE layer laminated to our high purity silicone and slit through the center to provide for easier needle penetration as well as to release the vacuum that forms when a large volume of sample is withdrawn from a vial. This septum provides chromatographic
Septa Ptfe found in: Septa PTFE Silicone 18-400 Cs144, Preassembled R.A.M.™ 9mm Ribbed Screw Thread Cap with PTFE/Silicone Septa, Septa, Flat, PTFE Faced,..
4ml, 13-425 Sample Vials: LBSV014CRS: Red PTFE/White silicone septa + Black cap with hole, for 4ml screw top vial: 100: Ask for quote: LBSV104CSS: Red PTFE/White silicone septa + Black cap without hole, for 4ml screw top vial: 100: Ask for quote: 10ml / 20ml Headspace Vials: LBSV220CSS: White PTFE/White Silicone + Aluminium cap with hole, for
Caps/Septa for 1.5mL screw vials, 100/pack Temperature limit for PTFE/Rubber septa: -40°C up to 110°C Temperature limit for PTFE/Silicone septa: -60°C up to 200°C
8mm PTFE / Silicone Septa for 1.8ml Screw Cap Autosampler Vials - OVSC
Instrument-Specific Unassembled Convenience Kits with SureStop vials and AVCS caps: Thermo GC Autosampler: TTRGKK: Clear GOLD Grade: Yes: Blue: Blue Silicone/PTFE: 2-SVWGK 9-SCK(B)-ST101: 100: Instrument-Specific Unassembled Convenience Kits with standard vials and AVCS caps: Aijiren LC Autosampler: HPLSK: Clear: Yes: Blue: Red Natural Rubber
Chemical Bonde Caps Vial Septa, PTFE Silicone Septa, PTFE Silicone Septa for HPLC Vials, do not fall from Cap » » Glass Vial Manufacturers, Scintillation Vial, Glass Sample Vials, Gc Vial
Jan 02, 2006 · Figure 3 - Typical mass chromatogram of volatile residue in hexane caused by PTFE/silicone septa: a) hexane extract of a piece of septum; b) vial septum was punctured once by a syringe to sample 1 μL hexane for GC analysis; c) hexane in the last vial was reanalyzed after 3 days; and d) analyzed immediately after 100 μL hexane was added from one vial to another (the septum was punctured 10
Septa, PTFE/Silicone tan PTFE/silicone septa, diam. × thickness × PTFE thickness 20 mm × 0.125 in. × 2 mil, pkg of 100 ea
Caps and Silicone/PTFE septa for polypropylene vials only, 100/pk. For use with clear or amber polypropylene vials 220-97331-00, -58, -59, -60,-61.
a barrier (usually PTFE) and one to allow for resealing (usually silicone) • Tri-layer (also known as a sandwich septum): Still made from two distinct materials – usually silicone surrounded on both sides by PTFE Table 1. Septa chemical compatibility. PTFE/Silicone/PTFE* PTFE/Red rubber Fluoroelas tomer PTFE/Butyl
30,3mm Septa, silicone creme/PTFE beige, 55°shore A, 3,2mm, for SCHOTT screw cap GL 32, 1000/pck €712.65 SKU: AAV41131582
Our closures with septa are made in a wide variety of sizes and materials ensuring you have the right combination for your sample type and analysis temperature. 9 mm Pre-Assembled Blue Polypropylene Screw Cap with Pre-Slit PTFE/Silicone Septa, 100/pk | PerkinElmer
10 mm Open Top Cap, 8.5mm Hole Black Polypropylene Blue PTFE/White Silicone, Pre-slit 55° 1.5 82028-436 100 Black Polypropylene Red PTFE/White Silicone 50° 1.3 82028-434 100 VWR® 10mm Wide Opening Screw Thread Vials Convenience Kits
