PTFE and silicone hplc vial septa with PP caps USA

Glassware is an important component of any synthesis or analytical work. All Thomson products have been manufactured in the USA using the best quality available. Products include: Vials for reactions and HPLC Autosamplers, caps and lid solutions, plastic and metal blocks for storage and dry down.

Phenolic Cap - More brittle than PP but useful for higher temperatures. Screw Caps - Screw Caps for EPA Style vials. Screw Top Vials: 20ml, 30ml, 40ml or 60ml. Septa Only - Replacement septa for open hole caps or liners. Septa: Low Bleed, Non-Slit, PTFE/ Silicone Rubber / PTFE, Red Rubber, Solid Top (closed), White Silicone Rubber / Red PTFE

12 mm x 32 mm, Screw Neck Vial, 2 mL, PTFE/Silica, Cap and Septa, 100/PK €74.00 SKU: WT186000989

Clear vials with write-on spot, blue screw caps, PTFE/red silicone septa 100/pk Amber vials with write-on spot, green screw caps, PTFE/red silicone septa 100/pk 5182-0554 Clear vials, blue screw caps, PTFE/silicone/PTFE septa 100/pk 5182-0555 Clear vials with write-on spot, blue screw caps, PTFE/silicone/PTFE septa 100/pk 5182-0866

A specially moulded seal with a PTFE insert. Sealing surface of Butyl and PTFE affects a more positive seal than non-PTFE-faced septa. Ideal choice for temperatures below 125°C. Good sealing characteristics, excellent resistance to most solvents with reduced coring and high puncture tolerance.

Kinesis Inc kinesis-usa.com Vials and caps are lot-tested by HPLC for ... KVP6037 300μl clear PP; PTFE/Silicone Septa 100

LBSV221CSS. Pre-slit, Blue PTFE/White silicone septa+ Black screw cap with hole, for 8-425 screw top vial. 100. Ask for quote. LBSV122CRS. Red PTFE/white silicone septa + Aluminium cap, for 2ml crimp top vial. 100. Ask for quote. LBSV112CRS. See full list on membrane-solutions.com

Our closures with septa are made in a wide variety of sizes and materials ensuring you have the right combination for your sample type and analysis temperature. 9 mm Pre-Assembled Blue Polypropylene Screw Cap with Pre-Slit PTFE/Silicone Septa, 100/pk | PerkinElmer

4.Nature PTFE/nature Silicone septa 22*3mm. 5.Environmental analysis. 6. silicone ptfe septa. Features . 1) Caps and vials are ideal for sampling and storage. 2) Caps are lined with PTFE/silicone for excellent sealability and chemical resistance. 3) Caps are manufactured of high quality materials to eliminate sample contamination.

PTFE/Red Rubber septa are not recommended for multiple injections with long run times or retention of samples for further analysis after initial puncture. PTFE/Silicone Septa: (T/S) PTFE/Silicone is the most versatile septum material offered in various formulations to address specific applications requirements.

Silicone white / PTFE red 45° shore A 1.3 mm 100 / PE bag 702066 as above, but with closed top 702437 N 8 PP screw cap, black, center hole Silicone white / PTFE blue, slit 55° shore A 1.0 mm 100 / PE bag 702069 N 8 PP screw cap, black, center hole PTFE red / Silicone white / PTFE red 50° shore A 1.0 mm 100 / PE bag 70249 – N 8 PP screw cap,

Shaoxing Aijiren Technologies Co.,Ltd is one of the leading China autosampler vial racks manufacturers and suppliers, welcome to wholesale cheap 2ml vial, 20ml vials, 12x32 vial, glass vials, hplc vial, sterile vials, 9mm ptfe septum, 10ml glass vial, 1.5ml wide opening vial, ptfe silicone septa, chromatography vial, vial filling machine, headspace vial rack, headspace vial crimper, autosampler

Jul 13, 2021 · Septa and Stoppers. In order to visualize the most common liners on the market, please see photos below. However, please note that colours of the liners are no exact indication for the identification of a liner material. Natural Rubber / TEF. RedRubber / PTFE beige.

Attached 24-400 polypropylene hole caps are known for good impact strength, cost effectiveness, and pliability. The PTFE PTFE/Silicone septa resists coring and is recommended when multiple injections are required. This .125" septa has excellent resealing qualities. Typically ships from Pennsylvania.

Vial Part: AR0-8972-13-B Verex™ Cap (pre-assembled), 9mm, Screw top, w/ Bonded-in PTFE/Silicone preSlit septa, blue, 1000/Pk We use cookies to improve your experience and our website service. To read more about our cookies policy, please read our privacy statement.