PTFE and silicone hplc vial septa with high quality Waters

Buy 2mL HPLC Autosampler Vials 9-425 Amber, with Writing Area, 9mm Blue Cap with pre-Slit PTFE and Silicone Septa [100pcs/pk] (2ml Vial (with Write-on Spot), Amber & Pre-Slit Silicone Septa) online on Amazon.ae at best prices. Fast and free shipping

Clear Glass 12 x 32 mm Screw Neck Total Recovery Vial, 1 mL Volume, 100/pk. In order to ensure the quality and cleanliness your analytical results rely on, all Waters vials are tested extensively to confirm the vials, cap, and septa have been manufactured properly,

LCGC Certified Clear Glass 12 x 32 mm Screw Neck Vial, Total Recovery, with Cap and Preslit PTFE/Silicone Septum, 1 mL Volume, 100/pk As a leading manufacturer of analytical instrumentation and consumable products, Waters knows how important it is to choose autosampler vials that enhance the performance of your other instrumentation.. Everything from needle design to volatility to cleanliness

Description · 9mm Septa 1.0mm thick with Red PTFE & White Silicone, normal one with out pre-slit.· Using for 9-425 HPLC vials, for some famous instruments.· Good sealing ability, corrosion resistance.· PTFE + Silicone.High quality septa. · Directly produced by ourselves, good quality

Pre-slit septa are offered in many of the same formulations as for non-slit PTFE/silicone septa and shares most of the physical and chemical characteristics. The septum is provided with a thin 0.005” PTFE layer laminated to highly pure silicone, and slit through the center for easier needle penetration and to release the vacuum that forms when a large volume of sample is withdrawn from a vial.

24mm Silicone/PTFE Septa is matched with 24mm screw neck cap, suitable for 24mm screw sample storage vial. Aijiren has an exclusive production technology that can compound PTFE and Silicone without adding any adhesives, so Aijiren’s Septa is soft and not easily deformed.

The from Aijiren Technologies is the Pre-Assembled, 2 mL Wide Opening Screw Top Glass Vial Convenience Packs Clear Vials, Blue Screw Cap, PTFE / Red Silicone Rubber Septa which comes 2020/02/19 · Aijiren provide high quality screw caps with

Home » News » septa caps » hplc vial caps with high quality for Waters HPLC Waters Product Category 1-4mL Autosampler Vials for HPLC, UPLC, GC 16mm, 25mm Test Tubes for Water Analysis 6-20mL GC Headspace Vials

20mm PTFE Septa. The PTFE layer of Aijiren’s 20mm PTFE Septa composite diaphragm is in contact with the reagent. It is chemically inert, resistant to acids, alkalis, temperature and adhesion. Even at high temperatures, it cannot work with concentrated acids, alkalis or strong oxidants. At the same time, the elasticity of the silicone rubber

Ref.No: Packing: Description: C0001195. 100pcs/pk. 0.3mL 9-425 PP Screw Thread Micro-Vial Transparent.12x32mm. Blue 9-425 Open Top Ribbed Screw Cap with 9mm White PTFE/Red Silicone Septa 1.0mm Thick.

LCGC Certified Clear Glass 12 x 32 mm Screw Neck Vial, Total Recovery, with Cap and Preslit PTFE/Silicone Septum, 1 mL Volume, 100/pk As a leading manufacturer of analytical instrumentation and consumable products, Waters knows how important it is to choose autosampler vials that enhance the performance of your other instrumentation.. Everything from needle design to volatility to cleanliness

LCGC Certified Amber Glass 12 x 32mm Screw Neck Vial, with Cap and Preslit PTFE/Silicone Septa, 2 mL Part Number: 186000847C Waters Certified vials are tested for cleanliness by HPLC and held to tightest dimensional tolerances in the industry.

9-425 Hplc Vial And Cap Kit Packing C0001064 2mL Amber Glass 12x32mm Flat Base 9-425 Screw Thread Vial with Label. Blue 9-425 Open Top Ribbed Screw Cap with 9mm Red PTFE/White Silicone Septa

LCGC Certified Clear Glass 12 x 32 mm Screw Neck Vial with Cap and Preslit PTFE/Silicone Septum, 2 mL Volume, 100/pk When shopping for vials that vials meet the most stringent requirements for dimensional tolerances, UV cleanliness, and MS cleanliness based on LC/GC standards choose LCGC Certified Clear Glass 12 x 32 mm Screw Neck Vials with Cap and Preslit PTFE/Silicone Septum, 2 mL

The Silicone/PTFE Septa produced by Aijiren uses high-quality raw materials and an exclusive compounding process. This process does not require any adhesives to compound Septa and Silicone to achieve no cracking, no falling off, and a perfect fit for autosampler vial and antosampler.