I pre-slit vial septa with high quality Aijiren

Quality vials are essential for reliable analytical results. All Waters Certified Vials are tested by LC or LC/MS to assure quality and cleanliness. The test results confirm the vials, cap and septa have been properly manufactured, handled and packaged, and are free from any potential contaminants which could result in chromatographic ghost peaks.

The plastic vial caps used are made of high quality polypropylene to exact manufacturing tolerances and lined in a controlled environment. Available vial cap colors are black only. Standard septa types include: Low Bleed NT Silicone Septa, .040" (1 mm) thick. Available with single-faced PTFE (pre-slit only).

Mar 11, 2021 · Aug 16, 2021 · discounting buy I pre-slit hplc vial septa price manufacturer. Aug 16, 2021 · Convenience Kit, Certified Wide Opening Total Recovery Vial w/10 uL Reservoir and 9 mm Screw Cap w/Bonded PTFE/Silicone, Pre-slit septum - 100 ea. Specifications. 3959124: CERT5000-993: $302.10: PK: 845-52226-PK: Assembled Kit, Certified 2 mL Wide Opening Clear Glass

Use the HPLC-UV method to test of menthol extraction solution of Hawach, Aijiren, Thermo PTFE bonded silicon septa, to confirm there are no obvious extraction species in our septa compared to world-famous septa. Experiment process: Put 100 mg Hawach, Aijiren, Thermo PTFE bonded silicon septa in 2mL ACN:H2O=1:1 solution for 24 h at room temperature, and then use HPLC-UV to test the extraction solution to see if there are some obviously impurities.

Most popular and economical septa for general GC purposes in Aijiren systems. Pre-slit PTFE/red rubber – 8RT1X Pre-slit, high quality red rubber with a thin (0.003") layer PTFE. For applications using a very thin-gauge syringe needle or in instances when a vacuum may form in the vial. Silicone rubber High quality, silicone rubber laminated to

China 9-425 Vial Insert Aijiren, 2ml Screw Inserted Vial with Cap Septa Pre-Slit, Find details about China Vial Insert Aijiren, Aijiren Vial Insert from 9-425 Vial Insert Aijiren, 2ml Screw Inserted Vial with Cap Septa Pre-Slit - Mastelf Technologies Co., Ltd.

Discounting wholesale 2ml chromatography vials Aijiren-Vials Shaoxing Aijiren Technologies Co.,Ltd is one of the leading China autosampler vial racks manufacturers and suppliers, welcome to wholesale cheap 2ml vial, 20ml vials, 12×32 vial, glass vials, hplc vial, sterile vials, 9mm ptfe septum, 10ml glass vial, 1.5ml wide wholesales I pre-slit chromatography vial septa price Aug 21, 2021

Nov 29, 2021 · Aijiren Autosampler Vial in 4ml 13mm--Aijiren Vials for. The Aijiren 15x45mm vials have a 13-425 GPI thread and can hold up to 4ml of sample. Use the 13 x 425 caps with septa for use as sample vials and with diffusion caps for wash vials. With closed top screw

① Compatible for short neck ND9 vials(12*32mm) most common used for HPLC/GC. ② Ribbed cap makes it easier for autosampler to capture. ③ Y shape pre-slt is special for thin or blunt needle while injection, and can also avoid bubble during penetration. ④ PTFE/Silicone septa have high chemical resistance can stand variety reagents.

2 mL Screw Top Vials & Screw Caps. Aijiren 2 mL screw top vials are constructed from from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching. Our 2 mL screw glass vials are available in both amber and clear. The associated 9 mm screw caps and closures come with your choice of septa constructed from either PTFE silicone or natural red rubber.

Most popular and economical septa for general GC purposes in Aijiren systems Pre-slit PTFE/red rubber – 8RT1X Pre-slit, high quality red rubber with a thin (0.003") layer PTFE. For applications using a very thin-gauge syringe needle or in instances when a vacuum may form in the vial Silicone rubber High quality, silicone rubber laminated to PTFE.

Cuvette. 9 mm Wide Mouth Screw Thread HPLC Vals. 9mm screw thread caps, septa, and vials are designed especially for use with Aijiren's and other rotating or robotic arm samplers 2ml, 12X32mm vials are manufactured of Clear. Type 1 Class A or Amber, Type 1 Class B borosilicate glass and include a write-in patch for sample identification.

· The septa matching for 9-425 screw thread caps, with pre-cut septa the silicone material is slitted in pre-slit,cross-shape and Y-shape while the PTFE lamination remains intact. This way concentration changes occurring with completely slitted septa can be avoided. · Pre-slit Septa 9mm for 2ml autosampler vials and easy for injection

1. SimPure. 2mL Autosampler Vials with Writing Area and Graduations, 9-425 HPLC, Screw Cap, Blue PTFE & White Silicone Pre-Slit Septa, 100 Pcs

8. Septa are made of the highest quality materials to ensure proper function and can be pre-slit to ease needle penetration. Application. 9mm screw thread caps and vials are suitable for Aijiren, AB Sciex, Brukers, Techcomp, PerkinElmer, ThermoScientifics, Shimadzu, Waters, CTC autosampler and other rotating or robotic arm samplers and