I pre-slit autosampler vial septa types Waters

WATERS SAMPLE VIALS AND ACCESSORIES. Adhesive Sealis a polyolefin film with a synthetic rubber adhesive. This seal is ideal for protein and peptide customers with samples in buffers. The adhesive is resistant to small concentrations (0-30%) of polar organic solvents and can be used between

2ml PP Screw Top HPLC Vial - Autosampler Vial, Hplc Vial. 2021 - 04 - 08. 2ml PP Screw Top HPLC Vial With Insert. Ref.No: Packing: Description: C0001195. 100pcs/pk. 0.3mL 9-425 PP Screw Thread Micro-Vial Transparent.12x32mm. Blue 9-425 Open Top Ribbed Screw Cap with 9mm White PTFE/Red Silicone Septa 1.0mm Thick.

40009-6R Red Pre-Slit Sil/PTFE 40009-6Y Yellow Pre-Slit Sil/PTFE zCaps are assembled with septa and secured to vials zKits are provided with ID vials graduated at 0.5, 1.0 and 1.5ml zSuperior performance with all Aijiren and Waters R.A

From the lowest bleed septa material in our caps to the most insert glass vial material, we are continuously refining our offerings by addressing small details that can make big productivity gains. Explore our range of vials, caps, vial inserts, high recovery vials, and more to find just the right solution to protect and store your samples.

31/7/2020 · Aijiren offers two types of pre-slit Septa, single slit and cross slit, such a slit can guide the injection needle accurately punctured Septa into the HPLC Vials, without a thin automatic injection broken, or the cushion falls off into the HPLC Vial contaminated sample.

Pre-slit PTFE/silicone – ST1X, ST101X, ST14X Pre-slit, high quality pure white silicone faced with PTFE. For applications using a very thin-gauge syringe needle or in instances when a vacuum may form in the vial.

Cap Type: Pre-slit Screw Thread Top; Size: 9 mm; Suitable for Vial Type: 1.5 mL, 1.8 mL, 2 mL 9-425 vials; Color: Blue, screw cap with PTFE / Silicone septa; Pre-slit openning; Application Compatible with Aijiren, Thermo, Waters HPLC instruments.

15/2/2012 · February 2012. Hi, In theory, yes, you can use other manufacturers vials. Through the inlet editor it is possible to confirgure different trays to take different vials. The one issue is that Waters vials use a pre-slit septa, this gives the best results because if the design of the injector system. This link might be helpful: Waters Vial Selector.

Aijiren Autosampler Vial in 4ml 13mm--Aijiren Vials for. The Aijiren 15x45mm vials have a 13-425 GPI thread and can hold up to 4ml of sample. Use the 13 x 425 caps with septa for use as sample vials and with diffusion caps for wash vials. With closed top screw seals, these vials

Pre-slit or Not Septa can be pre-slit or not and must be selected by evaluating a few method criteria. A pre-slit septa is ideal in applications requiring drawing 20% or more of the sample volume from the vial so that suction is avoided. The slit allows ambient gas to

Larger opening improves sample accessibility while reducing autosampler needle damage with “Pre-Slit” White PTFE / Red Silicone Septa lined Blue Cap SL.Vi1041 Vial, 2 , Clear, with Opentop Cap, Plain, Screw 9-425. 100ea 37,550

Use this simple septum selector tool to find the best septum for your autosampler vial and application.

100 X Autosampler Vials 2ml HPLC. $22.99. LOW EXPANSION COEFFICIENT - 9mm Screw Thread Autosampler Vials are made of clear Type 1, Class A Borosilicate Glass with very low expansion coefficient. It shows excellent chemical resistance to acidic and neutral solutions, due to its relatively low alkaline content even to alkaline solutions.

16/11/2018 · ADDITIONAL INFORMATION. Part number 186000307C comes with 100 12x32 mm (2 mL) screw neck vials and 100 caps with PTFE/silicone preslit septa. Part 186000307C is LC/GC-certified. It does not have the same level of testing as that with 600000668CV, which are LC/MS-certified.