Assembled Caps and Septa for 10-425 Screw Thread Vials. Molded Closure. Cat. no. 501 357 Vial Kit, Assembled, 12X32, 10-425, Clear Glass, Black PP Cap, PTFE ...
Vial Cap & Septa 10-425 Black Cap PTFE/Silicone/PTFE Septa, Pack of 1000 E-mail this product to a friend Caps and Septa for 2.0 mL Big Mouth Step Vials Material: (preassembled) Choose preslit caps (available for some vials) to reduce the risk of needle bending, release vacuum from high-volume injections, and improve injection reproducibility
champagne vials; caps, 11 mm, aluminium, magnetic, special caps for „snap“ vials „snap“ vials made from glass, PP or TPX; Screw vials. for manual use and autosamplers. type of neck 8, 9, 10-425, choice of different color caps and sept with 8, 9 or 10 mm diameter; clear and amber glass
Products name: 1.5ml 10-425 Screw Autosampler Vials ND10: Dimension: 10mm: Cap Color: Black: Septa details: White,Red,1.5mm thickness. Material: PP for Cap, PTFE
Product # Description. Add to Cart. 27208-U: Vials, screw top with polypropylene open-top cap, pre-assembled, pkg of 100 volume 2 mL, clear glass vial (standard opening - 4.6 mm), red PTFE/silicone septum
The material of Hawach septa and cap for snap vial are high-quality polypropylene with precise manufacturing tolerances and aligned in a controlled environment.
Our Advanced Vial Closure System (AVCS) caps remove subjectivity around achieving the optimal seal compression when closing a vial. Solvents Some solvents that are commonly used for HPLC, UHPLC and GC experiments can impact the septa integrity.
the autosampler needle. The crimp cap vial requires crimping tools to carry out the sealing process. For few samples, manual crimper tools are the best choice. For large numbers of sample, automated crimpers are available. Snap caps are an extension of the crimp cap system of sealing. A plastic cap is stretched over the rim of the vial to form
Red PTFE/white Silicone septa, 9mm green short screw-thread polypropylene cap, 6mm centre hole White PTFE/red Silicone septa, 9mm blue short screw-thread polypropylene cap,closed top This is the end of the introduction of HPLC Vials Caps with Septa.
Black 10-425 Open Top Screw Cap with Red PTFE/White Silicone Septa 1mm Thick. 100pcs/pk. C0001197. 2mL Clear Glass 12x32mm Flat Base 10-425 Screw Thread Vial with Label. Black 10-425 Open Top Screw Cap with Red PTFE/White Silicone Septa 1.0mm Thick. Kit Packing. 100pcs/pk. C0001198. 2mL Amber Glass 12x32mm Flat Base 10-425 Screw Thread Vial
a 0.125” septa Borosilicate glass vials come with a standard 0.125 in. thick, I-CHEM blue, PTFE/silicone septa in an open-top 24-414 polypropylene cap. The I-CHEM molded-in septa retainer ring holds the septa securely in place without bonding to the cap, so septa can be removed and
UltraBond seal, cap & septa form an inseparable unit, so that septa cannot fall out. 1.5mL screw vial kit, including vial, cap and septa, 100/pack Kit part number
We offer screw cap , Crimp neck and snap on vials .We offer B;ue screw cap with PTFE/silicon speta , with pre-slit septa and bonded septa. We appreciate that selecting the correct chromatography vial is not always straight forward which is why we are here to help you select right kind of vial for your autosampler.
screw caps without septa are recommended instead of phenolic caps. Phenolic is a sulfur-based product that can flake and contaminate samples when syringe needle pushes through the septum. 8-425 Screw Caps with Septa (2714S29) Open top screw caps with the 8 mm septa installed. Septa for 8-425
Vial, Closure and Septa Selection Guide. Use this as a guide to selecting the products you need. For technical assistance, contact Supelco Technical Service at (800) 359-3041 or e-mail us at techservice@sial.com.
