With Tuflux ® tubing, benefit from low extractable profiles for both silicone and TPE tubing to transfer critical fluids across all process steps. A Broad Range of Tubing Standards Tuflux ® tubes are available in standard dimensions from 1/8" (3.2 mm) to 1" (25.4 mm) for the internal dimensions and a wall thickness from 1.6 mm to 4.8 mm.
black polypropylene hole cap, thread for 13-425, PTFE/red rubber septum, for use with 4 mL vials with 13-425 thread, pkg of 100 ea Expand Hide Match Criteria: Product Name All Photos (1)
Open top vials come assembled with polypropylene caps with low-bleed 0.125" PTFE/silicone septa inserted (.135" septa for E-series vials). Sizes are 20mL, 40mL, and. Related Products:
Ideal for sampling from aseptic and sterile processes, the NovaSeptum® GO sterile sampling system provides consistently representative samples, safely and securely. NovaSeptum® GO
2 天之前 · One type, self-lubricating liquid silicone rubbers (LSRs), provides an excellent medical-grade material that can solve manufacturing challenges and increase device performance. These elastomers contain a built-in lubricant that, over time, elutes to the molded part’s surface. For medical-grade LSRs, this lubricant offers many of the same
DWK Life Sciences I-Loc closures combine the advantages of an aluminum seal with the convenience of a screw cap. The innovative design consists of an open-top polypropylene (PP) screw cap, which is connected to a gray bromobutyl stopper. I-Loc closures are available in five different colors and can be autoclaved.
My departmental stores sell 6 mL and 10 mL glass vials with a plastic cap that are outfitted with a PTFE septum, they are guaranteed autoclavable by the company with everything, including the septum, sealed. You can then puncture the septum with a needle in sterile conditions, should be fine. We get them for around 10 pounds per 100.
2017年12月5日 · Westar RS components must be sterilized by the pharmaceutical company. West typically recommends autoclaving: (a) a steam cycle at a minimum temperature of 121.1°C (not to exceed 123°C) for a maximum of 60 minutes, followed by (b) a drying cycle at 105°C for a maximum of 8 hours. For select applications, gamma irradiation may be the right
2023年1月29日 · A clean short (40–60 mm) needle is first inserted into the Schlenk line hosing using an appropriate screw-thread (Luer-lock) adapter and hose clamp. The needle and hosing are purged with inert gas for 15–30 seconds before piercing the needle through the septum on the reagent bottle.
Aluminum, clear, 5.5 mm opening, red PTFE/white silicone/red PTFE, 1.0 mm thick 100 SU860080 − − Convenience kits 2.0 mL Clear vials, with PTFE/red rubber cap, unassembled 100 27239 1000 27240-U
General Purpose Septa for GC. Aijiren’s general-purpose septa are made from an enhanced injection-molded silicone rubber material. The septa material, dark red or gray in color, is specified to withstand over 200 automatic injections at an injection port temperature of 350 °C. You can have confidence in your chromatographic results knowing
(usually silicone) • Tri-layer (also known as a sandwich septum): Still made from two distinct materials – usually silicone surrounded on both sides by PTFE Table 1. Septa chemical compatibility. PTFE/Silicone/PTFE* PTFE/Red
The septum is suitable for use with all GL 45 sizes of the DURAN® GL 45 bottles from 100 to 20,000 ml. A liquid tight seal is provided when used in combination with the red PBT GL 45 open topped screw cap. Wide temperature usage range from – 50 °C up to + 180 °C. Autoclavable at 121 °C for 15 minutes. Dry heat sterilizable at up to 180 °C.
Plugs and caps of various material compositions, sizes, colors, and closure types to fit a wide range of tube types; may be sterile, non-sterile, and/or autoclavable; may possess leak-preventing features including O-rings and cap liners.
rubber septum cap Cap material: Plastic PP Structure: Septa And Cap Septa: PTFE & Silicone Vial top: Screw Thread Top Packing: Carton Contact Now Add to Cart Company Info. Danyang Xianghe Pharmaceutical Packaging