Vials, Caps, & Septa check quantity 13 mm Black Screw Cap with PTFE/Silicone Ultra-Low Bleed Septa for Waste and Wash Vial, 1000/pk
Screw cap with septa silicon/PTFE. 17,31 € – 139,04 €. Caps made of polypropylene suitable for screw caps 9-425. In “Pre-slit” reference, septa is prepierced for an optimal injection
PTFE-Faced Silicone Rubber Septa, Autoclavable, DWK Life Sciences Supplier: DWK Life Sciences Ideal for use with open-top caps to access container contents with a syringe. Resists coring Highly chemically-resistant PTFE facing maintains integrity of content Silicone rubber backing allows repeated puncturing through the seal
Wheaton White Polypropylene Screw Caps with bonded PTFE Faced Silicone Liner for E-Z Ex-Traction Vials, Fits 2 and 4mL vials; Cap Size: 13-425; Case/250: Science Lab Vials: Amazon.com: Industrial & Scientific
This septum is electron bonded to the cap and will not come dislodged during shipment or use. Black, Screw Neck Cap and PTFE/Silicone Septum, 100/pk - 186000841 | Waters My Account
DURAN® Replacement Screw Caps, GLS-80 White PSU with PTFE Silicone Seal, pack/5. Duran PSU Screw Caps with PTFE Silicone Seal are used with bottles with DIN thread. Screw cap. 88.5mm diameter x 40mm height. GLS 80. polysulfone with PTFE silicone seal. For DURAN laboratory glass bottles with DIN 80 thread. MPN:
PTFE septa cap for screw vials-Aijiren HPLC Vials. Septa Cap Vial at Thomas Scientific a 0.125” septa Borosilicate glass vials come with a standard 0.125 in. thick, I-CHEM blue, PTFE/silicone septa in an open-top 24-414 polypropylene cap. The I-CHEM molded-in septa retainer ring holds the septa securely in place without bonding to the cap, so
Screw cap black polypropylene (Top Hat), PTFE/silicone, for use with 4 mL vial with 13-425 thread, pkg of 100 ea; find Supelco-27439 MSDS, related peer-reviewed papers, technical documents, similar products & more at Sigma-Aldrich
Ptfe/silicone/ptfe found in: 11 mm Crimp Top Aluminum Cap with PTFE/Silicone/PTFE Septa, Preassembled R.A.M.™ 9mm Ribbed Screw Thread Cap with PTFE..
The PTFE (Polytetrafluoroethylene) liner is chemically inert, and will not interfere with your test results. Clear (Flint) Straight Sided Round Glass Jars are designed without shoulders for maximum storage capacity and content visibility. These multipurpose glass jars are very versatile. Available in a wide variety of sizes, from 1oz to 32oz.
PTFE-lined solid-top storage caps; PTFE on film/foam backing offers broad chemical resistance; Not autoclavable; Order as individual sample storage vials and closures or as unassembled convenience kits. Unassembled convenience kits saves time during sample preparation.
Wheaton® MicroLiter Assembled Kit Clear Vial, Blue Cap and PTFE/Silicone Septa. Wheaton® MicroLiter Screw Thread Autosampler Vials come in fully assembled kits that are clean, sealed and ready to use. Assembled kits are shipped with the septa installed inside the cap and the cap screwed onto the vial. MicroLiter vials are manufactured from Type 1 borosilicate glass. Vial 9mm Borosilicate
Centrifuge tubes, PTFE with screw cap cap. 50 ml. Item No. 9315703. Centrifuge tubes Oak Ridge Typ 3114, FEP Teflon® FEP with Tefzel® ETFE screw cap. Resistant to all acids, bases and solvents. Autoclavable. Operating temperature range -100 to +150°C. Can be used brim-full in refrigerated centrifuges at up to 50000xg rcf.
Showing 1-30 of 62 results for " screw cap with ptfe liner " within Products. Sort by Relevance. Cap liner, PTFE
Pre-Assembled Caps & Septa for Standard Opening Screw Thread Vials (8-425) Black Top Hat™ PTFE/Silicone Septa/Closure (Patented) The patented Top Hat™ septa and closure was designed to provide a positive physical lock to assure that preassembled components arrive intact. Type.