Thermo Scientific™ 20 mm Headspace Vials, Septum, and Caps These Thermo Scientific™ National™ 10mm vials are 2mL, 12x32mm with 10-425 thread finish.
Septum for 10-425. Screw Caps. –. –. White Virgin PTFE, 0.01" Septum. 53. 0.25. C4010-10. 1000. –. –. Red PTFE/White Silicone, Soft Septum.
Septum for 10-425. Screw Caps. –. –. White Virgin PTFE, 0.01" Septum. 53. 0.25. C4010-10. 1000. –. –. Red PTFE/White Silicone, Soft Septum.
Crimp seals ND8 with red rubber/PTFE septa Screw cap with 10-425 thread and 7 mm hole or closed ... Transparent polypropylene housing, PE cap.
Product Code & Description. Low extractable background, pre-Slit septum improves precision in large volume injections. Available in a variety of colors for
9mm & 76-Series Caps w/ Septa . 10-425 Screw Thread Vials, 2.0mL, 12 x 32mm ......................... 26 ... polypropylene screw cap with a PTFE.
Septum description. Hardness. Thickness. Pack of. 70283. N 8 aluminium crimp cap, silver, center hole. PTFE virginal, white. 53° shore D. 0.25 mm. 100 / PE
B7800-40, ASSEMBLED 40 ML VIAL KITSOLID CAP PTFE LINER 100/PK C4010-35W, WHITE 10-425 CAP FOR SHIMADZUT/S SEPTA, 100/PK, 1000/CS.
0.8 mL vials using 8 mm crimp caps (171 vial tray). For GC and LC modes AS Al cap with PTFE septum 11 mm (PK100) ... Combo Pack, 1.2P, with PE Plug Cap.
MS-Pure Septum - Natural (non-pigmented) Silicone/Natural PTFE. With the increasing sensitivity of Wide Mouth (WM) Screw Vials & Caps 10-425 (pages 14).
2 mL, amber glass, thread, 10-425, polypropylene cap, PTFE/silicone septa, unassembled. 29119-U. 100 ea. Snap Seal. 2 mL, clear glass, PTFE/rubber septum.
in glass, septa and caps, we developed Verex HPLC / GC vial Cap (pre-assembled), 10-425, w/ Bonded-in PTFE/Silicone preSlit septa, black*.
Sep 15, 2015 Screw Neck Vials ND10, wide opening, 10-425 thread and ... 6.3.1 With PE Snap Ring Cap transparent, 6mm centre hole, hard or soft version.
One Piece Snap Cap, PE. Natural. Integral PE Membrane. Yes. 1000/CS. 501 319. One Piece Snap Cap. Orange. 0.01” PTFE Disk.
Screw caps (closure type, clear solid top cap, seal thickness 0.010 in., thread 10-425) are available as solid caps. Polypropylene caps have a maximum